StoneColor

  • Manufacturer Nowocoat
  • Nanomaterial Unknown
  • Category Home and Garden, Paint
Nano Risk Category (Se, hvordan det er genereret)

Eksponering

  • Professionel

    High
  • Forbrugere

    High
  • Miljø

    High

Effekter

  • Mennesker

    Unknown
  • Miljø

    Unknown

Produkt Information

USAGE:
StoneColor® was specially developed for the surface treatment outdoors for absorbent and porous surfaces such as paving slabs and block paviours made of cement, concrete and lime sandstone.
Apply StoneColor® after thoroughly cleaning the surfaces of grease, dirt, dust etc. with StoneCleaner, as well as a high- pressure cleaner, to ensure the surface is free of dust, dirt and grease. Once the surface is dry, we recommend that once again, using a brush or vacuum cleaner, the nal remaining particles of dirt are removed. This is the only way to guarantee optimal binding between StoneColor® and the surface to be coated and will achieve the best result.
TECHNICAL DATA:
Product: StoneColor® Use: Coating, protection and impregnation of mineral surfaces outdoors. Speciality chemicals: Based on nanotechnological bonds with synthetic res- ins and UV-resistant pigments. Basis: Water-based, non- diluted or, depending on the use, dilute with water up to 10%. Characteristics: Strong adhesion, extremely long- lasting, resistant to oil, water and chemicals. UV-resistant for outdoor use. Drying time: Approx. 60 minutes at 20° C and with 60 % rel. humidity. Application: Via paintbrush, paint roller or spray gun. Coverage: 1 litre suf ces for approx. 3 to 5 m2, depending on the state of the surface and application method. Cleaning: Rinse the tools used thoroughly in clear, tepid water. Storage: In a dry and frost-free place, out of reach of children. When correctly used, 5 year guarantee against aking of concrete.

Producentens beskrivelse

USAGE:
StoneColor® was specially developed for the surface treatment outdoors for absorbent and porous surfaces such as paving slabs and block paviours made of cement, concrete and lime sandstone.
Apply StoneColor® after thoroughly cleaning the surfaces of grease, dirt, dust etc. with StoneCleaner, as well as a high- pressure cleaner, to ensure the surface is free of dust, dirt and grease. Once the surface is dry, we recommend that once again, using a brush or vacuum cleaner, the nal remaining particles of dirt are removed. This is the only way to guarantee optimal binding between StoneColor® and the surface to be coated and will achieve the best result.
TECHNICAL DATA:
Product: StoneColor® Use: Coating, protection and impregnation of mineral surfaces outdoors. Speciality chemicals: Based on nanotechnological bonds with synthetic res- ins and UV-resistant pigments. Basis: Water-based, non- diluted or, depending on the use, dilute with water up to 10%. Characteristics: Strong adhesion, extremely long- lasting, resistant to oil, water and chemicals. UV-resistant for outdoor use. Drying time: Approx. 60 minutes at 20° C and with 60 % rel. humidity. Application: Via paintbrush, paint roller or spray gun. Coverage: 1 litre suf ces for approx. 3 to 5 m2, depending on the state of the surface and application method. Cleaning: Rinse the tools used thoroughly in clear, tepid water. Storage: In a dry and frost-free place, out of reach of children. When correctly used, 5 year guarantee against aking of concrete.

Details

  • Unknown
  • Metal
  • Suspended in liquid
  • Denmark European Union